Non-intrusive setting motorized part turn actuator
  • Air ProNon-intrusive setting motorized part turn actuator

Non-intrusive setting motorized part turn actuator

AOX-Q series non-intrusive setting motorized part turn actuator is specially designed for a swing angle ranging between 90°and 270°, such as butterfly valves, ball valves.AOX supply the best quality AOX-Q series non-intrusive setting motorized part turn actuator with high technology and high performance.We are committed to providing good service and support to all of our clients around the world.We excpect to be your long term partner in the near future.

Send Inquiry

Product Description

Features

Protection:IP67, (IP68 optional) ExdⅡ CT5

Voltage:AC110~265V , AC / DC 24V Multi voltage input

Single phase: AC220V / AC110V / AC24V / DC24V

Applicable valve : Ball Valve (DN15-DN200); Butterfly Valve (DN25-DN400)

Material of Actuator Body: Aluminium Alloy

Local Control Unit: Local control knob of open/close/stop, switch knob of close control remote control/prohibit control(non-intrusive)

Display Mode: LCD, indication of opening(0-100%) and open/close fault

Control Mode: On-off signal control, Modulating (proportional regulation) control, Fieldbus Control etc.

Type of On-off Signal: Contact signal. Pulse signal

Type of Modulating Signal: 0-10V, 2-10V, 4-20mA, etc.

Type of Field-bus Signal: Modbus-RTU, Profibus-DP, etc.

Local Controller: AOX remote control(Optional)


1.   Shell:Hard anodized Aluminum casting and external epoxy powder coated against severe industrial environment.

2.   Limit switches for AOX-Q series non-intrusive setting motorized part turn actuator

-It is fastened by the two screws above,the setting is simple, each cam can be set separately.

-Once the setup is complete, each cam will always remain in this position.

3.   Terminal for AOX-Q series non-intrusive setting motorized part turn actuator

-Spring loaded push type terminal for tight wiring connection under severe vibration.

-The number of terminals are 22 for users.

-Terminal length: 8-9mm

-Terminal size: 10×22×32


Performance Parmeter

Model

Max Output Torque

60/50Hz

Operating Time

Max Drive Shaft Size

Power

Rated Current(A)

Hand

wheel Revolution

Weight

single phase

three phases

N·M

90°

mm

W

110V

220V

380V

440V

N

Kg

AOX-Q-005

50

18/22

Φ20

20

1.10/0.95

0.55/0.54

0.3/0.3

N/A

10

7.5

AOX-Q-008

80

18/22

Φ20

20

1.10/0.95

0.55/0.54

0.3/0.3

N/A

10

7.5

AOX-Q-010

100

18/22

Φ20

20

1.10/0.95

0.55/0.54

0.3/0.3

N/A

10

7.5

AOX-Q-015

150

21/25

Φ20

40

1.65/1.67

0.88/0.84

0.31/0.31

0.30/0.31

11

17.3

AOX-Q-020

200

21/25

Φ20

40

1.67/1.67

0.89/0.85

0.31/0.31

0.30/0.31

11

17.3

AOX-Q-030

300

26/31

Φ32

90

1.85/1.86

0.92/0.92

0.35/0.35

0.34/0.34

13.5

22

AOX-Q-050

500

26/31

Φ32

120

3.60/3.62

1.55/1.58

0.59/0.59

0.58/0.58

13.5

23

AOX-Q-060

600

26/31

Φ32

120

3.65/3.62

1.60/2.20

0.60/0.59

0.59/0.58

13.5

23

AOX-Q-080

800

31/37

Φ40

180

4.10/4.10

2.15/2.20

0.85/0.85

0.79/0.79

16.5

29

AOX-Q-120

1200

31/37

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

16.5

29

AOX-Q-150

1500

78/93

Φ40

120

3.65/3.62

1.60/2.20

0.60/0.59

0.59/0.58

40.5

77

AOX-Q-200

2000

93/112

Φ40

180

4.10/4.10

2.15/2.20

0.85/0.85

0.79/0.79

49.5

83

AOX-Q-300

3000

93/112

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

49.5

83

AOX-Q-400

4000

155/185

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

82.5

83

AOX-Q-500

5000

155/185

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

82.5

83

AOX-Q-600

6000

155/185

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

82.5

83


Standard Specification

Shell

Enclosure :IP67,NEMA4, Exd II CT5

Power

Standard:220VAC/1ph

Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10%

24VDC/110VDC/220VDC

Motor

Asynchronous motor

Limit switch

2×Open/ Close, SPDT,250VAC 10A

Auxiliary limit switch

2×Open/ Close, SPDT,250VAC 10A

Torque switch

Close/Open, each 1, SPDT,250VAC 10A

Except AOX-Q-005/008/010

Travel

90°±10°

0°~270°

Fail safe/
Operating temperature

Internal-placed thermal protection, Open 120℃ ±5℃/Close 97℃ ± 5℃

Indicator

Continuous position indicator

Manual operate

Declutching mechanism, operate by handwheel

Self-locking device

Self-locking by worm and worm gear

Mechanical limit

2 × external adjustable stopper

Space heater

30W(110V/220VAC)

Conduit entry

2 × PT 3/4”

Ambient temperature

-25℃~+70℃(-30℃、-40℃、-60℃ optional)

Lubrication

Grease moly(EP type)

Material

Steel, Aluminum alloy, Aluminum bronze,Polycarbonate

Ambient humidity

Max 90%RH

Non-Condensing

Anti-vibration

X Y Z 10g,0.2~34 Hz,30 minutes

External coating

Dry powder, Epoxy polyester,high anti-corrosion


Option Specification

No.

Option scheme

Remark

1

Explosion-proof actuator(Exd ⅡCT5)

AOX-Q series

2

Potentiometer unit(1K-10K)

AOX-Q series

3

Proportion control unit (control signal 4-20mA DC/1-5V/1-10V)

AOX-Q series

4

Local control units (local control open/stop/close optional switch, local/remote switch)

AOX-Q series

5

Travel 120°, 180°,270°

AOX-Q series

6

Direct current motor(24VDC)

AOX-Q series

7

Water-proof actuator (IP68,10M,250HR)

AOX-Q series

8

Reverse electromagnetic control and transmission integrated motor starter

AOX-Q series

9

Torque switch (SPDT× 2  250VAC 10A)

Except AOX-Q-005/008/010

10

Electric current position sensor (output 4-20mA DC)

AOX-Q series

11

High temperature resistance actuator (-10℃~+100℃)

AOX-Q series

12

Low temperature resistance actuator (-60℃~+30℃)

AOX-Q series

13

Low speed actuator

AOX-Q series

14

Bus-control unit

AOX-Q series

Application Field






We are a secure and excellent choice for HVAC, Waterworks, Offshore, Pull & paper,Chemical, Petrochemical, Refinery, Energy, Oil & Gas, Mining, Pharmaceutical, Food &Beverage, Shipbuilding, Power plant and other industries. AOX-Q series non-intrusive setting motorized part turn actuator provide the most reliable solution to satisfy our valuable customers and exceed expectations.


Manufaturing process

Our Patents

Our Certificate

Transportation

FAQ

Q: About the sample what is the cost of transportation?

A :The freight depends on weight, packding size and your country or province region, etc.


Q:Do you have any certificate for your AOX-Q series non-intrusive setting motorized part turn actuator?

A:Now we have got CE,ATEX,GOST,SIL,EAC certificate for our products.


Q:which countries are your AOX-Q series non-intrusive setting motorized part turn actuator sold to?

A:Our products are exported to Europe, American, Southeast Asia, Russia and Africa, and spread over more than 30 countries and regions in the world.



Hot Tags: Non-intrusive setting motorized part turn actuator, China, Manufacturers, Suppliers, Factory, Quality, Advancede, Classy, Newest

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
验证码,看不清楚?请点击刷新验证码
+86-577-59890750
[email protected]