China Motor operated multi turn actuator suppliers and manufacturers, factory

Product Description

Features

Torque Range: 40 - 1000 Nm Direct Output

Speed: 34 35 45 67 70 90 (rpm)

Electrical interface: 2* NPT 3/4 , 1* NPT1 1/2

Modulating Type: S4 50 %, up to 600 triggers per hour

Applicable Voltage:3 phase: AC 380 V (±10 %) /50/60 Hz (±5 %)

Modulating type signal:

Input signal: 4 - 20 mA; 0 - 10 V; 2 - 10 V

Output signal: 4 - 20 mA; 0 - 10 V; 2 - 10 V

Loss Signal Mode Setting:N/A

Dead Zone:≤2%

Instantaneous reversal protection

Over torque protection

Intelligent block protection

Motor overheat protection

Limit and torque sensing

Absolute encoder precision detection valve position

1. Integrated Local control for AOX-M series motor operated multi turn actuator

Local control switches and locking type selector switch local/stop/remote are magnetic switches, controlled by magnetic reed, thus assure the damp proof sealing inside of the actuator.

2. Wide range of output torque .

Direct torque outputs range from 40 Nm to 1000Nm.When combined with a worm gearbox, the maximum torque output can be adjusted up to 50,000Nm.

3. Diferent control options meet your specific requirement.

AOX-M series motor operated multi turn actuator can be combined with various controls from simple On/off and intelligent modulating control or fieldbus interface.

Performance Parmeter

Model	Output torque	Speed	Maxshaft diameter	Power	Rated current（A）50HZ	Flange	Weight
					three phases
	N·m	RPM	mm	W	380V	ISO5210	Kg
AOX-M-007	70	45	Φ28	400	2.42	F10	32
	70	90		400	2.95
AOX-M-010	120	35	Φ28	600	2.25	F10	38
	120	70		600	3.18
	120	105		800	5.15
AOX-M-020	300	34	Φ40	1100	4.50	F14	68
	300	67		1100	6.85
AOX-M-050	450	34	Φ40	1100	9.58	F14	70
	450	67		1500	14.80
AOX-M-060	600	34	Φ55	3000	10.89	F16	103
	600	67		4000	16.50
AOX-M-080	800	34	Φ55	3000	12.43	F16	103
	800	67		4000	23.50
AOX-M-100	1000	34	Φ55	4000	30.20	F16	103

Standard Specification

Shell	Enclosure:IP67（IP68 optional）,NEMA4 and 6
Power	Standard：380V AC/3ph Optional：110/220V AC/1ph,440V AC/3ph, 50/60Hz, ±10%
Motor	Asynchronous motor
Limit switch	1×Open/ Close, SPDT,250V AC 10A（on/off model）
Auxiliary limit switch	1×Open/ Close, SPDT,250V AC 10A（on/off model）
Torque switch	1×Open/ Close, SPDT,250V AC 10A
Operating temperature	Internal-placed thermal protection，Open 120℃ ±5℃ /Close 97℃ ±5℃
Manual operation	Declutching mechanism,with handwheel operation
Self-locking device	Self-locking by worm and worm gear
Space heater	30W (110/220V AC) Condensation preventing (according to conditions, can be adjusted)
Conduit entry	Double seal 3×（PT3/4”、PT1”、PT1-1/2”optional）
Ambient temperature	-25℃～+70℃（-30℃、-40℃、-60℃ optional）
Lubrication	Special oil for 00 actuators
Material	Ductile iron, high-strength aluminum alloys, steel, aluminum bronze, polycarbonate
Ambient humidity	Max 90％RH	Non-Condensing
Anti-vibration	X Y Z 10g,0.2～34 Hz,30 minutes
External coating	Dry powder, epoxy polyester,high anti-corrosion
Overload protection	Torque peak overload protection
Display screen	LED display (smart regulation type)
Setting mode	Non-intrusive setting (without opening the cover set type)
Electrically	Integrated control unit with a non-invasive rotary switch

Option Specification

NO.	Option cheme	Optional
1	Explosion-proof actuator (Exd Ⅱ CT4)	AOX-M series
2	Water-proof actuator (IP68,10M,250HR)	AOX-M series
3	High temperature resistance actuator (-10℃~+100℃)	AOX-M series
4	Low temperature resistance actuator (-60℃～+30℃)	AOX-M series
5	Special output drive	AOX-M series

Inspection Equipment

In order to improve production efficiency and provide users with the most satisfactory products, we have strengthened the management of the whole process from product design and procurement to manufacturing, service, etc., and established documented control procedures for each link according to ISO9001 standards.

We know quite well that the raise of quality requires data analysis. AOX spares no efforts to collect quality data, and contribute to material selection, parts making, testing and regularly destructive testing to guarantee the quality of AOX-M series motor operated multi turn actuator.

Supplier Management

Our company has a complete and strict external supplier management system. In order to standardize the management of the supply channels of our company, purchased parts and external suppliers, establish a safe and stable supplier team.It will help to control the quality of our AOX-M series motor operated multi turn actuator.

Application Field