Modulating motorized quarter turn actuator
  • Air ProModulating motorized quarter turn actuator

Modulating motorized quarter turn actuator

AOX-Q series modulating motorized quarter turn actuator is specially designed for modulating and open-close duty in process technology. AOX-Q series modulating motorized quarter turn actuator serve all over the world, including Europe, the Americas, ICAO, Australia, Africa, Asia, the Middle East and Southeast Asian countries. It is widely used in water treatment, heating, petroleum, chemical industry, electronics, light industry, food, medicine, textile, paper making, hydropower, ships, smelting, new energy and other fields. In addition, it has established very friendly relations with many Fortune 500 companies.

Send Inquiry

Product Description

Features

Torque range:50~6000N.m

Switching time:22~185 S

Working time : S1 long time standard for both On-off and modulating type.

S2 standard, 30 min.

Material of Actuator Body: Aluminium Alloy

Display Mode: LCD, indication of opening(0-100%) and open/close fault

Control Mode: On-off signal control, Modulating (proportional regulation) control, Fieldbus Control etc.

Type of Modulating Signal: 0-10V, 2-10V, 4-20mA, etc.


1.   Various output torque from 50Nm to 6000Nm.

2.   Window of AOX-Q series modulating motorized quarter turn actuator:Polycarbonate window, built-in O-rings,fixed metal gland, the gland comes with two drainage channels to prevent water,easy to observe.

3.   Torque switches of AOX-Q series modulating motorized quarter turn actuator (except for AOX-Q-005/008/010)

- Protect actuator from damage caused by overload from the driven valve over the whole travel.

- Once the torque switching acts, the actuator will be stopped immediately.



Performance Parmeter


Model

Max Output Torque

60/50Hz

Operating Time

Max Drive Shaft Size

Power

Rated Current(A)

Hand

wheel Revolution

Weight

single phase

three phases

N·M

90°

mm

W

110V

220V

380V

440V

N

Kg

AOX-Q-005

50

18/22

Φ20

20

1.10/0.95

0.55/0.54

0.3/0.3

N/A

10

7.5

AOX-Q-008

80

18/22

Φ20

20

1.10/0.95

0.55/0.54

0.3/0.3

N/A

10

7.5

AOX-Q-010

100

18/22

Φ20

20

1.10/0.95

0.55/0.54

0.3/0.3

N/A

10

7.5

AOX-Q-015

150

21/25

Φ20

40

1.65/1.67

0.88/0.84

0.31/0.31

0.30/0.31

11

17.3

AOX-Q-020

200

21/25

Φ20

40

1.67/1.67

0.89/0.85

0.31/0.31

0.30/0.31

11

17.3

AOX-Q-030

300

26/31

Φ32

90

1.85/1.86

0.92/0.92

0.35/0.35

0.34/0.34

13.5

22

AOX-Q-050

500

26/31

Φ32

120

3.60/3.62

1.55/1.58

0.59/0.59

0.58/0.58

13.5

23

AOX-Q-060

600

26/31

Φ32

120

3.65/3.62

1.60/2.20

0.60/0.59

0.59/0.58

13.5

23

AOX-Q-080

800

31/37

Φ40

180

4.10/4.10

2.15/2.20

0.85/0.85

0.79/0.79

16.5

29

AOX-Q-120

1200

31/37

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

16.5

29

AOX-Q-150

1500

78/93

Φ40

120

3.65/3.62

1.60/2.20

0.60/0.59

0.59/0.58

40.5

77

AOX-Q-200

2000

93/112

Φ40

180

4.10/4.10

2.15/2.20

0.85/0.85

0.79/0.79

49.5

83

AOX-Q-300

3000

93/112

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

49.5

83

AOX-Q-400

4000

155/185

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

82.5

83

AOX-Q-500

5000

155/185

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

82.5

83

AOX-Q-600

6000

155/185

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

82.5

83


Standard Specification

Shell

Enclosure :IP67,NEMA4, Exd II CT5

Power

Standard:220VAC/1ph

Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10%

24VDC/110VDC/220VDC

Motor

Asynchronous motor

Limit switch

2×Open/ Close, SPDT,250VAC 10A

Auxiliary limit switch

2×Open/ Close, SPDT,250VAC 10A

Torque switch

Close/Open, each 1, SPDT,250VAC 10A

Except AOX-Q-005/008/010

Travel

90°±10°

0°~270°

Fail safe/
Operating temperature

Internal-placed thermal protection, Open 120℃ ±5℃/Close 97℃ ± 5℃

Indicator

Continuous position indicator

Manual operate

Declutching mechanism, operate by handwheel

Self-locking device

Self-locking by worm and worm gear

Mechanical limit

2 × external adjustable stopper

Space heater

30W(110V/220VAC)

Conduit entry

2 × PT 3/4”

Ambient temperature

-25℃~+70℃(-30℃、-40℃、-60℃ optional)

Lubrication

Grease moly(EP type)

Material

Steel, Aluminum alloy, Aluminum bronze,Polycarbonate

Ambient humidity

Max 90%RH

Non-Condensing

Anti-vibration

X Y Z 10g,0.2~34 Hz,30 minutes

External coating

Dry powder, Epoxy polyester,high anti-corrosion

Option Specification

No.

Option scheme

Remark

1

Explosion-proof actuator(Exd ⅡCT5)

AOX-Q series

2

Potentiometer unit(1K-10K)

AOX-Q series

3

Proportion control unit (control signal 4-20mA DC/1-5V/1-10V)

AOX-Q series

4

Local control units (local control open/stop/close optional switch, local/remote switch)

AOX-Q series

5

Travel 120°, 180°,270°

AOX-Q series

6

Direct current motor(24VDC)

AOX-Q series

7

Water-proof actuator (IP68,10M,250HR)

AOX-Q series

8

Reverse electromagnetic control and transmission integrated motor starter

AOX-Q series

9

Torque switch (SPDT× 2  250VAC 10A)

Except AOX-Q-005/008

/010

10

Electric current position sensor (output 4-20mA DC)

AOX-Q series

11

High temperature resistance actuator (-10℃~+100℃)

AOX-Q series

12

Low temperature resistance actuator (-60℃~+30℃)

AOX-Q series

13

Low speed actuator

AOX-Q series

14

Bus-control unit

AOX-Q series



Manufaturing process

Our company has been engaged in the manufacture of AOX-Q series modulating motorized quarter turn actuator for more than 20 years.The main processing equipment includes machining center, CNC lathe, CNC milling machine, CNC drilling machine, CNC drilling machine, AOX sustained investment in high-level equipment enables the strict control on manufacturing process, which assures good quality.


Inspection Equipment

Installation, maintenance and storage of AOX-Q series modulating motorized quarter turn actuator

1 There should be no loose clearance at all joints of the actuator and the adjustment mechanism to ensure good adjustment effect, and the connection bolt should be evenly and symmetrically tightened during installation.

2 The electrical installation of the electric actuator shall be carried out according to the relevant construction requirements of the electrical installation, and the explosion-proof products shall be carried out in accordance with the requirements of the “Installation Specifications for Electrical Equipment in Explosive Hazardous Locations”.

3 Electric actuators should be maintained frequently. For places with high vibration, always check whether the fasteners are loose, whether the connectors are in good contact and whether the locking is reliable.

Our Certificate

Transportation

FAQ

Q:Can we as your agent?

A:Yes,We have many agent in all over the world,Contact us for further details.


Q: Can your factory print our brand on the AOX-Q series modulating motorized quarter turn actuator ( or package ) ?

A:Our factory can laser print customer’s logo on the product with the permission from customers.We need an authorization letter from you to allow us to print your logo on it .


Q:How do you make a quick respnse to customer’s inquiry?

A:Our professional team will reply you online or by email,skype and phone.


Hot Tags: Modulating motorized quarter turn actuator, China, Manufacturers, Suppliers, Factory, Quality, Advancede, Classy, Newest

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
验证码,看不清楚?请点击刷新验证码
+86-577-59890750
[email protected]