High speed single acting pneumatic actuator
  • Air ProHigh speed single acting pneumatic actuator

High speed single acting pneumatic actuator

AOX-P series high speed single acting pneumatic actuator have high quality and long life-cycle to meet the valve automation market.AOX products have been mastering the technology of valve automation industry for decades. Choosing AOX-P series high speed single acting pneumatic actuator is a professional choice. We have first-class product technology and professional R&D team to provide you with appropriate design.

Send Inquiry

Product Description

Feature

Higher performance and reliability
Multifunction position indicator
Compact housing design, suitable for any application and working environment
Air supply pressure:Double acting: 2-8Bar;Spring return: 2-8Bar
Openrating temperature:Standard:-20°C +80°C
Lowtemperature: -40°C + 80°C
Surface material: Hard anodized
ACCESSORIES AVAILABLE
• Different Square reductions suitable for drive shaft
• Centering rings for all sizes
• Solenoid valves
• Limit switch boxes

1. Integrated design.
Integrated design for AOX-P series high speed single acting pneumatic actuator is adopted. All type of single acting actuators and double acting actuators are provided with same cylinder body and end cap. The acting module could be easily changed by installing or demounting springs.
2. Spring for AOX-P series high speed single acting pneumatic actuator.
Combined preload security group spring could be mounted or increased/decreased easily and safely during assembling or during in field usage.
3. Travel Stops.
The two sole adjusting screws at the side surface of AOX-P series high speed single acting pneumatic actuator which has been already installed on the valve could make the adjustment of location of the valve opening and closing more convenient and accurate.
4. AOX piston rack and pinion design for compact construction, symmetric mounting position, high-cycle life and fast operation.Reverse rotation can be accomplished in the field by simply inverting the pistons.



Pattern selection of the actuator

The suggested safety factor for AOX-P series high speed single acting pneumatic actuator under normal working conditions is 30-50%
Example:
The torque needed by valve =80N.m
The torque consider safety factor(1+30%)=104N.m
Air supply=5Bar
According to the tale of spring return actuator’s output,
we find output torque of SC00300 is:
Air stroke 0° =172N.m
Air stroke 90° =112N.m
Spring stroke 90°=165N.m
Spring stroke 0°=105N.m
All the output torque is larger than we needed.



Bill of Materials

Performance Data (Single Acting)

Operation Mechanism (Single Acting)


The air source pressure comes into the body of AOX-P series high speed single acting pneumatic actuator between the two pistons from air entrance (2) and pushes the pistons toward the end of the cylinder body while the springs at each ends inside the cylinder body is forced to shrink with the air between the pistons and the ends of the cylinder body released from air entrance (4).in the meantime, the racks of pistons drive the output shaft (gear wheel) simultaneously to rotate anticlockwise. After the direction of the air source pressure is reversed by the solenoid valve, the springs at each end begin to reset and the pistons are forced toward each other by the elasticity with the air between two pistons released from air entrance (2). Meanwhile the output shaft (gear wheel) would be driven by the racks of the pistons simultaneously to rotate clockwise. (if the pistons are assembled in different direction from each other, the output shaft would turn out to rotate in inverse direction when the springs reset, namely the single acting reverse SO type)


Our Advantages

1. We have a standardized quality control system. Each AOX-P series high speed single acting pneumatic actuator will undergo product testing before leaving the factory. We have almost no customer complaints in 3 years.
 
2. We have a provincial R & D testing center, advanced testing equipment can carry out various tests on parts and finished AOX-P series high speed single acting pneumatic actuator.
 
3. We have a rapid after-sales response mechanism. When we receive customer feedback on after-sales issues, we will arrange technology to find problems and quickly provide solutions.

FAQ

We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.

Q: How long can I expect to get the sample of AOX-P series high speed single acting pneumatic actuator?
A :The samples will be ready for delivery in 3-5 days The samples will be sent va international express such as DHL ,UPS ,TNT, FEDEX and would be arrived within 3-5 days.

Q: How can order the AOX-P series high speed single acting pneumatic actuator without any acknowledge of import ?
A :We could arrange you shipping or air or express for you and deliver everything to your port or provide you door to door service.

Q:How's the delivery?Because I really need them is urgently?
A:For sample order 3~7days will be no problem.And for regular order we promise in 15 days.



R&D Capability

Manufacturing process

Our Patents

Our Certificate

Transportation

Hot Tags: High speed single acting pneumatic actuator, China, Manufacturers, Suppliers, Factory, Quality, Advancede, Classy, Newest

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
验证码,看不清楚?请点击刷新验证码
+86-577-59890750
[email protected]